|
Installation
& Base Options.
All flagpole installations
should be engineered to comply to the specific site requirements on
a project basis. Windloads, soil conditions and flag sizes will all
imapct on the choice of flagpole or banner pole
selected.
Intrack
can assist in the selection of the appropriate product for your
site and can provide full structural computations specific to your
project if required. (subject to quotation).
Bases:
Spigot
Base: The spigot is a galvanised steel tube that extends into the
concrete footing and provides for a simple and low cost
installation. Spigots are recommended for smaller domestic and
commercial flagpoles up to 7.0mtr. They provide a robust footing
that can be DIY using a rapid set concrete mix.
Spear
Base: Used for small flagpoles (up to 6.0mtr) that are installed on
a temporary basis for use at exhibitions, field days etc. In severe
windloads or excessive size flags the use of a spear footing may be
limited.
Flange
Base: The most common method for fixing a flag or banner pole. Used
in most commercial and permanent locations, the flange base is
secured using hook bolts that are cast into a significant concrete
footing. This allows for easy adjustment and leveling of the
flagpole. Footing sizes are determined by windload, flag size and
soil composition. This should verified by an engineer.
Hinged
Base: A hinged base allows for the ease of lowering the flagpole to
ground level without having to remove it completely from its
footing. Usually a standard feature on 'Rota-Arm' banner poles
where ropes are not used. It allows for ease of flag/banner
changeover and repair without the need for use of reach
trucks.
Frangible Base: A
standard feature for most roadside flag or banner poles. They are
designed to shear in the event of an impact by a motor vehicle
reducing the point of impact . The pole is likely to dislodge from
its base at time of collision. Regulations vary from council to
council, state to state. It is important to check the requirements
with local authorities to confirm when frangible bases are
required.
|

Spigot
base
|

Spear
Base
|

Flange
Base
|
|

Hinged
Base
|

Frangible
Base
|

Ragbolt
Cage
|
|