Flag flying

22
Oct

Flagpole and flag terminology

Sporting facilities, schools, business, government buildings, museums and places of worship, flagpoles stand tall all around Australia. How much do you know about flagpoles? Do you know your terminology?

Harness your inner vexillologist, and discover key flagpole and flag components with our Intrack terminology list.

Flag and flagpole terminology

Cleat- The device used to secure the bottom of a flagpole halyard (rope).

Colour Fastness- The ability of a material to resist fading and colour migration.

Double Seal- A flag which reads correctly from both sides because a portion of the flag has another design sewn to the back side.

Flash Collar- Decorative cover used at the base of an outdoor flagpole.

Fly End- The free flying end of a flag, usually opposite the heading.

Fringed- A flag with decorative fringe around all or part of its perimeter.

Front- The surface seen when a flag is in its normal flying position with the hoist to the viewer’s left. (The “Back” is the reverse).

Grommets– Brass rings or eyelets (normally in the heading) for mounting outdoor flags.

Halyard- Rope for an outdoor flagpole used to raise and lower the flag.

Heading- The heavy canvas or other reinforcing material at the side or end from which the flag or banner will be supported.

Hoist- The side of a flag next to the pole.

Joint- The device used to hold a 2-piece pole together.

Outdoor Flags– Flags constructed primarily for use on an outdoor pole- with heading and grommets or rope.

Roped- A flag with a rope passing through the heading and looped and secured at each end. The halyard of the flagpole is then attached to the loops. Normally used only on large outdoor flags.

Single/Reverse- A flag which reads correctly from the front and reverse from the rear.

Snap Hook- A device used to attach a flag to the halyard (rope) on a flagpole..

Field- The predominant colour of a flag.

Finial- The ornament at the end of a flagstaff or flagpole.

Flag Hoist- Signal flags in a group attached to the same halyard and hoisted as a unit.

Fly- The free end of a flag, farthest from the staff. The term is also used for the horizontal length of the flag.

Grommet- A metal ring placed along the hoist of a flag to attach the halyard. Two piece metal grommets were first used in the U.S. about the time of the Civil War or just after.

Halyard- Rope used to hoist and lower a flag.

Header- A heavy cloth strip, usually canvas, sewn to the hoist edge of a flag and often grommeted for hoisting.

Hoist- The part of the flag closest to the staff. The term is also used for the vertical width of a flag.

Outrigger Pole- A flagpole coming off the side of a building at an angle.

Ratio- The relationship of a flag’s width to it’s length, e.g. France is 2:3; Germany is 3:5, Russia is 1:2.

Reeve- This means to pull the halyard through the truck, raising or lowering a flag.

Staff- This is a pole the flag hangs on.

Swallowtail- This flag which comes to two or three points at the fly end.

Truck- This is the wooden or metal block at the top of a flagpole below the finial (staff ornament). It includes a pulley or holes for halyard.

Vexillology– This is the study of flag history and symbolism. The name comes from the Latin Word vexillum, which means flag.

Looking for a flagpole? Contact Intrack for more information. 

(Information Source: American Made Flag Store)

 

22
Jan

Happy Australia Day!

Happy Australia Day from Intrack!

Australia DayWelcome to the working year 2014. What better opportunity to celebrate and fly the Australian National Flag! Australia Day lets us show our Aussie spirit and we here at Intrack Systems Australia are proud to be Australian – manufacturing and installing flagpoles, sporting posts and banner display systems to the government, business sector and residential market.

We celebrate, you save

To celebrate our national day of pride, Intrack is offering up to 40 per cent off our full range of fiberglass flagpoles from now until the end of February.fiberglass pole 1

For more information call 03 9798 4433 or email Janelle at info@intrack.com.au.

Visit the It’s an Honour website for flag flying protocols.

Don’t forget …

Intrack has all your flagpole and sporting post needs covered. And more:

  • We maintain existing flagpoles.
  • We have a cherry picker.
  • We sell flagpole parts.
  • We offer free expert advice.

… and, Footy season is just around the corner, Yay!

29
Aug

Let’s celebrate National Flag Day

Intrack-Newsletter-head-flagdayIntrack Systems Australia Celebrates National Flag Day 3rd September 2013

To all the owners of a flagpole, here is your opportunity to show your national pride and fly the Aussie Flag Tuesday, 3rd September to mark the day of our flag’s birthday.

Flag Day CeremonySeptember 3, 1996

The announcement that the Governor General had officially proclaimed 3 September as Australian National Flag Day was made at a special ceremony held at Martin Place, Sydney.  (read more)

Our Aussie Flag

The Australian National Flag was officially flown “aloft and free” for the first time at the Royal Exhibition flagdaylogoBuildings, Melbourne on 3 September 1901 in the presence of Australia’s first Prime Minister Edmund Barton.

The design was the product of a public design competition held to find a national flag for the new Australian nation. At that time, following Federation, the sentiment freely expressed across the new states was of “One people, one nation, one flag”.

That same sentiment is equally relevant today. (read more about Flag Day)

Australian Flag fact sheet

The publication Australian flags is available free of charge from the electorate offices of Federal Members of Parliament and Senators. (visit itsanhonour.gov.au) 

Intrack flagpole project on EastLink for FrankstonIntrack raises Frankston’s EastLink profile

Frankston City Council at Carrum Downs receives 125mm x 10.0mtr Stepped Flagpoles.

Intrack Systems Australia won the tender to supply and install flagpoles on the EastLink Freeway on behalf of Frankston City Council.

The initial tender was for 8.0mtr flagpoles, however Intrack recommended a larger flagpole be used to have the capability to take a larger flag and therefore keep all flag sizes the same throughout Council.

Gumbuya Park sports flash new Rota Arm FlagpolesGumbuya Park

Greg from Intrack noticed the existing flagpoles at Gumbuya Park were not rotating and therefore their flags always kept on ripping. Intrack approached Gumbuya Park and advised them of the situation.  As a result Gumbuya Park ordered Intrack’s 60mm x 6.0mtr Rota Arm Flagpoles and, you can see for yourself, the results are eye catching!

“Thanks Janelle. I am so glad you called us and yes they do look great. Very Pleased. Thanking you guys” Deb Kluske. Gumbuya Park.

Do you know Intrack?

– We are based in Dandenong South
– We have been in operation for 17 years
– We are all Australian Made
Our services include:
IMG_0657– Planning
– Installation
– Goal post & Flagpole maintenance
– Flag scheduling and storing
– Traffic management
– Boom and operator for hire